Flash Andromax AD688G Via Flashtool: Tutorial
Introduction
Andromax AD688G is a smartphone that was released a few years ago, but it still has a good performance. However, if you experience any problems with your device, such as bootloop or bricked, you can solve it by flashing the firmware. In this article, we will show you how to flash Andromax AD688G via flashtool.
Preparation
Before you start flashing your device, there are some things you need to prepare. First, you need to download the firmware for Andromax AD688G. You can easily find it on the internet. Make sure you download the firmware that matches your device’s model and region. After that, you need to download the flashtool. We recommend using SP Flashtool as it is the most popular tool for flashing Android devices. Lastly, make sure your device is fully charged.
Step-by-Step Tutorial
1. Extract the firmware and flashtool files that you have downloaded. 2. Install the USB drivers for Andromax AD688G on your computer. 3. Open the flashtool application on your computer. 4. Click on the “Scatter-loading” button and select the scatter file that is located in the firmware folder. 5. Turn off your device and connect it to your computer using a USB cable. 6. Click on the “Download” button in the flashtool application. 7. Wait for the flashing process to complete. It may take a few minutes. 8. Once the flashing process is completed, you will see a green circle in the flashtool application. 9. Disconnect your device from the computer and turn it on. 10. Congratulations! You have successfully flashed Andromax AD688G via flashtool.
Conclusion
Flashing your device can help you solve many problems, such as bootloop or bricked. However, you need to be careful when flashing your device as it can cause damage if not done properly. We hope this tutorial on how to flash Andromax AD688G via flashtool can help you solve any problems you have with your device.